China Products   Home | About Us | Help| Your Cart
    Register Free | Logon
Products Companies Register Free
Home >> Industrial Supplies >> Construction Machine  

HDPE Pipe Butt Fusion Welding Machine (KY160)


Big Picture

Post Time: 2018-10
Products: More Products
Favorites: Add to Favorites  
 HDPE Pipe Butt Fusion Welding Machine (KY160)  

Product Description

Application and features:

*Suitable for butt welding of plastic pipes and/or fittings made of PE, PP and PVDF in worksite or workshop.
*Consists of basic frame, hydraulic unit, planing tool, heating plate, support for planing tool&heating plate, and optional parts.
*Removable PTFE coated heating plate with high accurate temperature control system.
*Electrical planing tool with safty limit switch.

*Be made of lightweight and high strength material; Designed with a clamp opening angle of 45 degrees C.
*Low starting pressure and high reliable seal structure.
*Changeable welding position enables to weld various fittings easier.
*Separate two-channel timer records time in soaking and cooling phases.
*High-accurate and shockproof pressure meter indicates clearer readings.

Optional parts:
*Stub end device for flange stub.
*Data logger.

2.2 How to put the pipe welded
2.2.1 Push two pieces of pipes be welded tidily into the frame and leave the scraper place to fix it well.
2.2.2 Push the pull rod to the switch of "forward " to shut up the pipes, and then pull it to the middle.
2.2.3 Check the height of the pipe, left and right, and then adjust to fix it till it is up to the centering. Switch to "backward", and separate the pipe till it is in the right place and then push to the middle.

2.3 Milling
2.3.1 Put scraper into frame and fix it, open the scraper switch on the panel.
2.3.2 Push " forward " and start milling, if the milling quantity is not enough, then the higher pressure shall be slowly adjusted till milling is available, when milling can be done continuously, pull " backward ", after it is in the right place, then push to the middle.
2.3.3 Open the heating switch on the panel, take out scrapers and put it on the accessory frame.

2.4 Alignment
2.4.1 Push the switch "forward " and close up.
2.4.2 Check two sides if they are matched each other, if not, please repeat "2.3 Milling "until it is identical, pull "backward", after it is in the right place and push to the middle.

2.5 Heat under pressure
2.5.1 Check the temperature controller if it displays the temperature has reached to the set-up value, if has already been reached, and then put the heating plate onto the frame. You must ensure that it will tighten.
2.5.2 Push the switch " forward " to close up, adjust the pressure till corresponding welding pressure value, wait till the terminal surface to present the turn-up height value that is required.

2.6 Heat-suck without pressure
2.6.1 Adjust the pressure up to corresponding heat-suck pressure value.
2.6.2 According to the welding of weld pipe specifications related to the corresponding parameters for endothermic time.

2.7 Switch over
2.7.1 Pull the switch " backward "and separate it, quickly take out the heating plate, then put it back to the accessories frame.
2.7.2 Push the switch "forward" to close up (switch over time shall be within the corresponding specified value).

2.8 Joint under the pressure
2.8.1 Adjust the pressure to corresponding joint pressure value.
2.8.2 According to the relevant specifications welding pipe weld parameters for the corresponding cooling time.
2.8.3 Pull the rod back to the middle.
2.8.4 Take out the pipe that had been welded, the welding at this time comes to the end.

More Product Features


HS Code:  8515800090
Trademark:  kaiyue
Model NO.:  KY160
Standard:  iso9001
Productivity:  1000PCS/Year
Origin:  Zhejiang Shaoxing
Packing:  Wooden Cases Binding
Welding Method:  Hot Melt Welding Machine
Assistant Appliance:  Welding Platform
Type:  Plastic Pipe Welding
Export Markets:  North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Company: Zhejiang Kaiyue Plastic Pipes Welding Machine Co., Ltd.

 Contact Us
Main Business:butt fusion welding machine
Contact Us   More Products


More Construction Machine Products Register Free

This member assumes full responsibility for the content of this listing. accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.


About Us | Free Login | Logon | Help
2008 China Products Copyright © 2011