E1 or T1 converter
In V.35, X.21, V.36, RS-530, between the Ethernet / Fast Ethernet bridge converter or IP router unframed E1 or T1 interface conversion to
The bit rate of 2.048Mbps E1, T1 was in for 1.544Mbps
Can be used as stand-alone devices or ASM-MN-214 rack cards
Reception, internal and external clock options
AC or DC power
RIC-E1 and RIC-T1 between E1 or T1 interfaces and standard data communication interface for conversion. These devices will ITU-T G.703E1 2.048Mbps and T1 1.544Mbps interface into V.35, X.21, V.36, RS-530, Fast Ethernet, Ethernet bridge or IP router.
RIC-E1 is equipped with an Ethernet interface and RIC-T1 through unframed E1 / T1 lines and using the full E1 / T1 bandwidth transparently connect remote LANs and VLAN. Equipped with routing interface RIC-E1 and RICT1 as a standard IP router. Thank modular design, all of the above interfaces can easily be converted to each other.
RIC-E1 and RIC-T1 full-duplex operation, the rate of 2.048Mbps or 1.544Mbps, RIC-E1 and RIC-T1 G.703 distance to the device for 300 meters (1,000 feet). They perform diagnostic loopbacks meet ITUV.54 standard (third ring) local analog loop (LLB). Bridging Rings can be activated by the DTE interface or bonding jumper on the board to start the loopback.
RIC-E1 and RIC-T1 support received from external and internal clock mode G.703 equipment.
This product is a portable enclosure installed in stand-alone devices unit, cassette version ASMMN- 214 can be installed in the rack. ASM-MN-214 rack can be inserted up to 14 hot-swappable converter cards, allowing any combination of different types of cards, "mixing and matching."